09
Oct
Every warehouse equipment that is used extensively, wears over time. The Hyster forklifts are not exception to this unwritten rule, especially if you use these machines on rough and uneven terrains. No matter how powerful these machines are, wear and tear is inevitable. However, with regular maintenance and inspection checks, you can extend the life span of the Hyster forklifts. These material handling machines are described as the most durable and long-lasting. However, if not used properly, the Hyster forklifts cannot deliver the right performance. Check our simple guide for getting the best from the Hyster forklifts:
For optimum performance, you need to lubricate all moving parts of your Hyster forklift regularly. If you grease the parts frequently, you will lower the risk of wear and tear caused by the friction.
Greasing the fittings should be part of your regular maintenance. You should always pay attention on worn bearings. When the bearings are worn or damaged, you should immediately replace them, because they can damage the Hyster forklifts.
Like all other material handling machines, the Hyster forklifts use fuel to keep the engine running. Because of that, you should pay attention on the fluid level, coolants, oil, transmission and hydraulic fluids.
If you want to keep your machine running, then it’s necessary to perform a regular inspection on the forklift tires. The tires should be worn down evenly, so make sure that is the case with the Hyster forklifts. Replace the tires that are damaged heavily.
If your Hyster forklift runs on battery, pay attention on the battery level. By ensuring that, you will prolong the life span of your Hyster forklift.
Last but not the least, keep an eye on the forklift’s lights. If any of the lights found on the control panel turns red, you should act fast. Lights indicate some internal malfunction. Eliminating any malfunction on time, will save you time and money in the future. Failing to do that, will cause your machine to break down quickly.
